ACEINNA MEMS inertial systems: 6-DOF (9-DOF optional) inertial measurement units, including the open-source OpenIMU platform, dynamic tilt sensors and an inertial navigation system with built-in GNSS / RTK, for autonomous driving, drones, robotics, precision agriculture and construction equipment. Click a datasheet icon to open the official datasheet.
| Part No. | Axes | Product Type | Size | Interface | Output Data Rate | Connector | Package | Gyro Range | Gyro In-Run Bias Stability | Gyro Non-Linearity | Gyro Scale Factor Accuracy | Gyro Bandwidth | Gyro Bias Over Temp | Gyro Angular Random Walk | Accel Range | Accel In-Run Bias Stability | Accel Non-Linearity | Accel Bandwidth | Accel Bias Over Temp | Magnetic Field Range (optional) | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OpenIMU330B | 6 | Surface Mount | 11 x 15 x 3 mm | SPI / UART | — | — | Ball Grid Array - 44 ball | 400 +/- deg/sec | 1.5 deg/hr | — | 0.02% | 5-50Hz | 0.3 deg/sec | 0.2 deg/ √hr | 8 g | — | — | 5-50 Hz | — | — | |
| OpenIMU335RI | 6 (9 optional) | Rugged / Sealed | 65 x 66 x 27mm | CAN / RS232 | — | Ampseal 16 6-pos | — | 400 +/- deg/sec | 1.3 deg/hr | 0.1% | — | 5-50 Hz | 0.1 deg/sec | 0.1 deg/√hr | 8 +/-g | — | — | 5-50 Hz | — | 8 +/-Gauss | |
| IMU383ZA | 6 | Embedded | 2.4 x 3.7cm | SPI / UART | — | 20-Pin (10×2) 1mm pitch header | — | ±400deg/sec | 1.3deg/hr | 0.1% | — | 5 - 50Hz | 0.5deg/sec | 0.08deg/√hr | ±8g | 0.015mg | 0.1% | 5 - 50Hz | 5mg | — | |
| IMU330RA | 6 | Rugged / Sealed (IP69K) | 93 x 65 x 27mm | 1000Base-T1 Automotive Ethernet, and CAN-FD | 10 – 1000 Hz | — | — | 300 +/- deg/sec | 1 deg/hr | 0.1% | — | 5-50 Hz | 0.1 deg/sec | 0.1 deg/√hr | 6 +/-g | — | — | 5-50 Hz | — | — |
No matching parts. Try relaxing the filters, or contact us for selection support.
| Part No. | Product Type | Size | Interface | Connector | Roll/Pitch Accuracy | Gyro Range | Gyro In-Run Bias Stability | Non-Linearity | Accel Range | Sensor Bandwidth | Output Data Rate | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MTLT335D | Rugged | 6.5 x 6.6cm | CAN / RS232 | Ampseal 16 | 0.05 deg | 400+/- deg/sec | 1.3 deg/hr | 0.1% | 8+/- g | 2 - 50Hz | Selectable to 100 / 200 Hz (CAN / Serial) | |
| MTLT305E | Rugged | 6.5 x 6.6cm | CAN / RS232 | Ampseal 16 | 0.15 deg | 400+/- deg/sec | 4 deg/hr | 0.1% | 8+/- g | 2 - 50Hz | Selectable to 100 Hz |
No matching parts. Try relaxing the filters, or contact us for selection support.
| Part No. | Position Accuracy (RTK) | Position Accuracy (SPS) | Heading Accuracy | Attitude Accuracy | Velocity Accuracy | Velocity Range | Rotational Rate Range | Accel Range | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| INS401 | 2cm | 1.2m CEP | 0.2deg | 0.02deg | 0.01+/- m/sec | 515m/s | 200+/- deg/s | 8+/- g |
No matching parts. Try relaxing the filters, or contact us for selection support.