First Ohm's application articles: design notes and recommended resistor series for pre-charge and bleeder circuits, PV inverters, surge protection, automotive and metering. Click a series code to open its product list; the full articles are on First Ohm's website.
9 articles | Source: First Ohm official website (updated 2026-11-04) | For selection support, please contact us
Pre-charge resistors limit the inrush current while capacitors charge; the anti-surge wire-wound SWM / SWA hold welded-joint patents in several countries. Case study: a servo-drive pre-charge circuit (SWA03, 3W, 68Ω).
Used in
Industrial power supplies, Inverters, Battery management systems (BMS), EV chargers, Home energy storage, Industrial equipment
Gate resistors for the IGBTs of PV inverters: MELF resistors dissipate heat well and withstand pulses; First Ohm recommends the SFP stabilized power MELF resistor.
Industrial and automotive designs often use molded wire-wound resistors to get an SMD part; the cylindrical SWM anti-surge wire-wound resistor mounts by SMT directly and offers better price and performance at the same size.
Used in
Industrial control equipment, Automotive electronics
Advanced welded spot of anti-surge wire wound resistorofficial article ↗
In brief
In conventional wire-wound resistors the joint between the wire and the cap can break under surges; First Ohm's improved welded joint makes the anti-surge wire-wound fusible SWMT / SWAT possible.
Used in
Power supplies, Mobile phone chargers, LED lighting, Motor start-up protection, Ignition devices
Anti-surge resistors used with gas discharge tubes (GDT), TVS diodes and varistors in surge protective devices; First Ohm recommends the SRM surge-resistant MELF resistor.
Used in
Surge protective devices (SPD), Lightning and ESD protection circuits
The gate resistor (Rg) of an automotive IGBT driver sets the switching speed, losses and EMI; First Ohm recommends the automotive-grade MM(V) and SFP(V) MELF resistors.
Automotive electronics must pass the ISO 7637-2 / ISO 16750-2 pulse 5a / 5b transient tests; an anti-surge resistor absorbs part of the surge, so a pulse-5b TVS diode is enough and costs less.
Lightning and breaker-switching surges on the grid affect the sampling resistors of electricity meters; First Ohm recommends long-term stable MELF resistors.